| GENERAL DESCRIPTION
The EAL Telephone Control
Unit is a Series Dialer used for ROUTING of telephone calls as required
by Long Distance Carriers, Inter-Exchange Carriers, FAX Store and Forward
Service Providers, and Internet Fax Service Providers. EAL can easily be
configured for these and other applications with only a few key strokes,
either via a PC connected to the Data Port, or via a Touch Tone Phone,
locally or remotely. The power and versatility of the EAL is derived from
itís built in programming language. If one of the default configurations
is unsuited to your application, you can always access the underlying programming
language and tailor the operation of the EAL to your particular requirements.
|
This dialer is based upon
the award winning Globenet AXS. The EAL Telephone Control Unit is a Series
Dialer used for ROUTING of telephone calls as required by Long Distance
Carriers, Inter-Exchange Carriers, FAX Store and Forward Service Providers,
and Internet Fax Service Providers. EAL can easily be configured for these
and other applications with only a few key strokes, either via a PC connected
to the Data Port, or via a Touch Tone Phone, locally or remotely. The power
and versatility of the EAL is derived from its' built in programming language. |
| FEATURES
Microprocessor Controlled
Fully Programmable
Non-Volatile Memory
Real Time Clock
Series Mode Transparent
Store and Forward Dialing
Least Cost Routing
Tables with a capacity of over 4,500 digits
15 General Purpose
Number Bins, for Local Access Numbers, Auth. Codes, etc.
Loop Start Compatability
DTMF Dialing, (towards
Line or Drop) with variable speed from 50 to 450 MS.
DTMF Detection, (From
Line or Drop)
Pulse Dialing towards
Line (10 PPS)
Pulse Detection from
Drop (10 or 20 PPS)
Switchable from Tone
to Pulse and back within the same Program
Call Progress Detection
(Dial Tone) with programmable frequency and tolerance
Programmable Delay
from 1 to 9.9 seconds
Off Keypad Dialing
(A, B, C, D)
Centrex/PBX Compatibility
Compatible with Telephone
Company Features (Call Waiting, 3 way calling, Voice Mail, etc.)
Remote Programming
using DTMF, from a standard touch tone telephone or PC/Modem
Local Programming
using DTMF, from a standard touch tone telephone or PC/Modem
Local Programming
using the RS-232 Data Port.
Password Protection
Programming playback
Compatible in areas
with and without interchangeable Office Codes and Area Codes.
Programmable Timers
(Off Hook, Release-Reseize, etc.)
Automatic Call Home
feature
PROGRAMMING
MANUAL: ZkIImanual_34.pdf
PROGRAMMING SOFTWARE: ZooKeeperII_Software
PRICE: STARTING AT $55 w.
POWER SUPPLY
EAL $52.00 ea.
choice of power supply
110V Each $3.00
220V Each $3.00
EAL w. 110V POWER SUPPLY
$55 BUY
EAL w. 220V POWER SUPPLY
$55 BUY
CALL OR EMAIL
FOR QUANTITY PRICING |
TECHNICAL SPECIFICATIONS
Physical:
Size 5.6" X 3.5"
X 1.1"
Weight 6.40
OZ
Color
Black
Material ABS
Plastic
Specification Min.
Typ. Max. Units
Power Requirement:
Voltage
12 14 VAC RMS
Current
250 500 mA
Operating Temp. 0
20 40 DEGREES C
Storage Temp.
-40 -- +85 DEGREES C
Humidity 0 --
85 % (No Condensation)
DTMF Receiver:
Level
-35 +3 dB
Level Difference -6
+6 dB
Frequency -1.5
+1.5 %
Duration 45
MS
Rotary Receiver:
Break/make 55/45
60/40 65/35 %
Speed
10 20 PPS
DTMF Sender:
Level
-5 -4 -3 dB
Twist
2 3 dB
Frequency -1.5
+1.5 %
Duration 40
Programmable MS
Rotary Sender:
Break/Make
60/40 %
Speed
10 PPS
OFF Hook AC Impedance:
300-3500 HZ
600 OHMS
DC Resistance:
On-Hook
10 M OHMS
Off-Hook
200 300 OHMS
Other:
Insertion Loss
0 dB
Ring Freq.
15 75 HZ
RING VOLTAGE
25 140 VAC RMS
|
